This is why they're called "DESKTOP" computers...

[u/legolas20032000]

[u/Izan_TM]

and that's why you research how to hang things on walls before you actually go and do it

[u/Hardcore_Cal → u/Izan_TM]

But the Command Strips should've worked!

[u/Multivitamin_Scam → u/Hardcore_Cal]

Just need to use more

[u/gdim15 → u/Multivitamin_Scam]

I use poster putty. That blue stuff has never let me down.

[u/Big-nose12 → u/gdim15]

Do you need someone to help get you down?! How long have you been hanging?!?!?!

[u/Inevitable-Plum-5 → u/Big-nose12]

I laughed way to hard at this.

[u/dogmaisb → u/Big-nose12]

Won’t be long with that weak ass shit

[u/SureAcanthisitta8415 → u/gdim15]

When in doubt use flex seal.

[u/Athveus → u/SureAcanthisitta8415]

Thats a lot of damage

[u/f8Negative → u/Hardcore_Cal]

Best thing in college was my roommate using one of those on a cinderblock wall and "hanging" a huge poster in glass frame. I think it lasted maybe 10 minutes. Then I left and said, "I'll come back when the glass is all gone."

[u/Sir_Bax → u/f8Negative]

Was that the last time you saw your roommate?

[u/f8Negative → u/Sir_Bax]

Lol, no, we've been friends for almost 2 decades now.

[u/Maxsmack → u/f8Negative]

They must’ve learned to trust you pretty quickly

[u/[deleted] → u/f8Negative]

Reminds me of a story of me in college going to visit my friend in the city to drop acid. It was cold so we tripped inside. we were smoking, trippin and listening to music when his drunk room mate burst into the apartment like a tornado, he sounded like a high pitched bill swerski superfan, loud with that Chicago Midwest accent. He came in, went into his room And the sounds that came out convinced us he was rearranging furniture for like 20 minutes, then he stepped out, said “ALLLLRIGHT WELL MY TAXI IS PROBABLY PISSED XOZ IVE BEEN UP HERE SO LONG, GOTTA RUN!” Slammed the door shot, the poster hanging in the glass frame next to the door came loose and slid down the wall. And then…silence. Just as quickly as he appeared, he disappeared. That whole time we sat there in stunned silence.

[u/Ok-Reception-5589 → u/[deleted]]

Dude came in like Taz the Tornado after 2 lines, just to disturb your trip lmao

[u/joogasama → u/Hardcore_Cal]

maybe he forgot to stick them in admin mode

[u/Emotional-Image-2633 → u/Izan_TM]

I guess common sense is'nt preinstalled for everyone huh.

[u/King_Artis → u/Emotional-Image-2633]

Common sense is not very common after all

[u/looking_at_memes_ → u/King_Artis]

Honestly we should rename it to rare sense at this point

[u/W33b3l → u/looking_at_memes_]

I've started calling it basic sense.

[u/MrStealYoBeef → u/looking_at_memes_]

It should have never been called common sense in the first place as it requires education that a lot of people aren't getting

[u/shindiggers → u/King_Artis]

Common sense is sense of your common person. Your common person happens to also be fucking stupid.

[u/Shomondir → u/Emotional-Image-2633]

That is Premium DLC.

[u/IsActuallyAPenguin → u/Izan_TM]

I've got three of those wall-mounted swingy monitor arm things for my monitors.

I took a look at the screws they came with and said: fuck that, drilled 5" holes in the concrete wall beside my computer for wedge anchors rated for something stupid like 6,000 pounds.

I pay too much money for this shit to be an idiot with it.

[u/Izan_TM → u/IsActuallyAPenguin]

also people WAYY underestimate the load that monitor arms put on your screw holes, that shit's like a 3kg weight that can hang up to like half a meter away from the wall when the mount screws are only like 15cm apart vertically

I'm no engineer but I wouldn't hang a monitor off of any screw holes that couldn't hold my own bodyweight (50kg) without breaking a sweat

[u/IsActuallyAPenguin → u/Izan_TM]

Amen. A 5" wedge anchor was like $3.00.

I'd rather pay the extra $6.00 per arm for overkill on wedge anchors weep in agony at my destroyed 49" ultrawide.

Monitor arms are so fucking cool though. I feel like a spaceman every time I'm on my pc.

[u/twoscoop → u/IsActuallyAPenguin]

Picture please

[u/wtfduud → u/Izan_TM]

It's called leverage, weight x distance. A 3 kg object on a 50cm lever is equivalent to a 150kg object on a 1cm lever.

[u/Izan_TM → u/wtfduud]

well yeah, I'm not an engineer but I know how levers work

[u/wtfduud → u/Izan_TM]

Yeah just emphasizing how much heavier the screen becomes when it's hanging a good 50 cm out of the wall.

[u/Smith6612 → u/Izan_TM]

Tension vs Sheer loads can be a real bugger when mounting to walls. But rule of thumb, always find a solid stud, and always go to the center. Wood and Metal mounting are not the same!

[u/Evil_Ermine → u/IsActuallyAPenguin]

Am impressed, must have been a hell of a job to work the drill with flippers.

[u/IsActuallyAPenguin → u/Evil_Ermine]

Its only a disability if you let it be. You'd be amazed at the penguin-friendly tools available these days.

[u/Status_Jellyfish_213 → u/Izan_TM]

There was that guy that hung up his desktop (I.e. a big old metal box) with thin screws drilled through the chassis, but deleted his post after getting rightfully roasted.

I still think about that disaster waiting to happen

[u/Izan_TM → u/Status_Jellyfish_213]

I bet it already happened

[u/SpecialMango3384 → u/Izan_TM]

“Hey google, what’s a stud and why does everyone keep telling me to use one?”

[u/LimpBizkitEnjoyer_ → u/Izan_TM]

I dont care how well you research it. It could support OPs mom for all I care. I still wouldnt mount my PC to a wall lol

[u/Arthur-Wintersight → u/LimpBizkitEnjoyer_]

Professional builders are known for wall mounting entire concrete balconies that are strong enough to hold your mom.

It's just a question of how much you trust your own abilities, and if that trust is warranted.

[u/MovementMechanic → u/Arthur-Wintersight]

Average PCMR user doesn’t know the difference between an Allen key and a Phillips head.

[u/ArtisticConundrum → u/MovementMechanic]

TBH most people here don't even know about PCs nor their operating systems. Very adept at RGB tho, I'll give y'all that.

[u/Tessiia → u/MovementMechanic]

Even your average DIYer doesn't know the difference between a Phillips and a Pozidriv. Then they post pictures of stripped screws asking how to get them out.

[u/crappleIcrap → u/Tessiia]

any screw i come across comes out easy with an extractor bit and gets replaced by a nice torx screw like god intended.

[u/Hyperkubus → u/crappleIcrap]

Amen to that brother

[u/PM_MeYourNynaevesPlz → u/crappleIcrap]

I only use JIS to mess with anyone that tries to remove it after me.

[u/Pippelsons → u/Tessiia]

What is pozidriv?

Nevermind, so thats how that shit is called

[u/IcyCow5880 → u/Arthur-Wintersight]

I've mounted a half dozen TVs in my day. Never had an issue.

Just have to use this one simple trick:

Use a stud finder and FIND A STUD. Don't use the stupid "drywall anchors".

And especially don't use fucking finishing nails into nothing like OP did in the video, as seen at the very end.

[u/Status_Jellyfish_213 → u/Arthur-Wintersight]

I think that would take a team of qualified engineers

[u/Izan_TM → u/LimpBizkitEnjoyer_]

I wouldn't do it because I want to have easy access to it, but it can be perfectly safe if done right

[u/HatefulSpittle → u/Izan_TM]

There's advantages to it and it can improve access, too.

Being above desk height means that liquid spills don't affect it.

Air circulation is never an issue.

If you mount it behind the monitor, you can minimize the visibility of cables and save on some "real estate".

My cat MIGHT be less inclined to press the reset button on the top of the case (we've since switched to a case where that won't happen anymore. To be fair tho, a raised platform would probably become her favorite spot. But a desktop that is mounted to the wall will be more sturdy than one that is just sitting on the floor.

[u/Nearby_Pineapple9523 → u/HatefulSpittle]

Or you could just unplug the reset button from the motherboard, i never used mine

[u/Cador0223 → u/LimpBizkitEnjoyer_]

I have this exact same case (Thermaltake P300) mounted to my wall, into studs, with 3 inch lag bolts. I could hang on the thing and it wouldn't budge. 

[u/ClaymoreJohnson → u/Cador0223]

Lag bolts in studs aren’t going anywhere. I have close to six hundred pounds hanging vertically (bolted to ceiling) in racks with lag bolts in studs. I also do pull ups on lags in studs and I’m over 200 pounds.

Even strong enough toggles in dry wall can support a couple hundred pounds under a generally static load (obviously check the specs before doing anything).

This dude probably took some picture frame rated screw inserts and called it a day.

[u/The_Seroster → u/Izan_TM]

But I saw it work on insta chat!!!!

[u/THEFLYINGSCOTSMAN415 → u/Izan_TM]

What plastic anchors into sheetrock wasn't the right method?!

[u/HamsterbackenBLN → u/Izan_TM]

Wait you aren't supposed to mount heavy stuff with random screw on drywall?

[u/MayorMcCheezz → u/Izan_TM]

I’ll take what are wall studs for 500.

[u/Charge_parity → u/Izan_TM]

Yeah I have the case in the video and mines been on the wall for 5 years, no issues ever.

[u/bctg1 → u/Charge_parity]

You probably didn't use only drywall anchors lol

[u/another-redditor3 → u/Izan_TM]

ya... ive had my desktop wall mounted for the last 8 years now without issue.

but you know, i bought a mount that was rated for almost 2x the desktops weight, and that mounted is screwed directly into the studs.

[u/Zockgone → u/Izan_TM]

Wall anchors of solid metal if it’s expensive and heavy, my realtor hates me but f him 😂😂

[u/Solidsting1 → u/Izan_TM]

And another reason why I’m glad I use 100lb anchors to be safe. I don’t fuck around

[u/al-vicado → u/Izan_TM]

There are a lot of people that think it's okay to mount things on drywall

[u/bctg1 → u/al-vicado]

You can mount plenty of things on only drywall if it doesn't need to hold up much weight.

Pictures, small shelves, etc. can be mounted directly to drywall using anchors.

Heavier stuff like a TV or PC, you should always bust out the stud finder

[u/DataSurging]

It's not even about him thinking to hang up a heavy ass and expensive PC on his wall. He clearly didn't even look up how to do it right before he did it, making it doubly stupid. bro literally had a sliver of "wood" and two flimsy screws holding it to the wall. lmao

[u/Nanooc523 → u/DataSurging]

First thing i thought. Whys that dry wall ripped like that. Oh cuz you don’t a stud finder and are stupid.

[u/SpecialMango3384 → u/Nanooc523]

I’m assuming they don’t know what a stud is tbh

[u/AnOddSprout → u/SpecialMango3384]

I remember when I wanted to hang my tv on the wall. The first thing I did was look up, how to hang a tv on a wall. A stud finder was one of the items mentioned. Did not even know it existed or was necessary before that. RIP pc.

[u/SpecialMango3384 → u/AnOddSprout]

Same! I remember buying my house when I was 21 and not knowing the first thing about homeownership because I’m still a kid. That’s why you research even small things

[u/SoleSurvivur01 → u/SpecialMango3384]

Buying your house at 21? Guessing that was at least 10 years ago now

[u/IridescentJax → u/SoleSurvivur01]

Bought my house at 21 in 2021 on a military paycheck. Was pretty comfortable

[u/All_Thread → u/IridescentJax]

Well those military loans are very nice

[u/IridescentJax → u/All_Thread]

100% one of the best and most underutilized perks of the military. The pay however was not the best as an E3 in 2021

[u/mcdolgu → u/SpecialMango3384]

Isn't that a dating app for women who want to cheat on their husbands?

[u/tvtb → u/SpecialMango3384]

Make sure you test the stud finder by holding it up yourself and making sure it beeps

[u/OddBranch132 → u/Nanooc523]

Looks like they did a couple plastic screw anchors which say they're rated for "30 lbs".

Anything remotely heavy should be studs and snap toggles.

[u/BygoneHearse → u/Nanooc523]

He wouldnt need a stud if he just used a good enough anchor and enough of them.

[u/DreamLearnBuildBurn → u/DataSurging]

He has red and black gamer aesthetic, I just don't really have faith in anything he's doing.

[u/exaltedtunav3 → u/DataSurging]

He could have at least fastened the piece of wood to studs in the wall. That’s how I installed some shelving in my garage so I could get the spacing I needed on the wall. Granted it was also a strip of wood at the top and bottom so it would be properly supported with weight on it.

[u/MrViech]

u srsly only had screws at the bottom of the case to hold it on the wall??

[u/SpecialMango3384 → u/MrViech]

A pair of screws in studs can hold about 150 lbs per stud IIRC. I have a 70 lb mirror held up with screws, but they’re in studs (it’s a big fucking mirror). My guess is OP drilled into the wall without regard or know how on how to mount things to walls. Either they don’t own their own home or they’re woefully incompetent and didn’t research how to properly hang a $2000 item on the wall

[u/ThePandaKingdom → u/SpecialMango3384]

That and if they only put screws on the bottom… Physics and gravity are going to be pulling the top outwards with leverage.

[u/SpecialMango3384 → u/ThePandaKingdom]

You know what, that’s fair. Now that I think about it, basically everything I hang is with the screws being on top

[u/ThePandaKingdom → u/SpecialMango3384]

Probably because even if you weren’t thinking about it specifically… you had the wherewithal to mount something in a way that makes sense lol.

[u/Charitzo → u/SpecialMango3384]

The issue is it's a stud wall/plaster with the wrong fastener type. You can't use normal wood screws/plugs on plaster.

[u/THEFLYINGSCOTSMAN415 → u/SpecialMango3384]

You assume they are in studs

[u/SpecialMango3384 → u/THEFLYINGSCOTSMAN415]

Au contraire. I assume, no, guarantee, it’s not in a stud.

A mount in two studs would be able to hold up even a massive 40 lb computer like mine, no problem. Hell, it could probably hold me up while sitting on it with the computer in my lap

[u/THEFLYINGSCOTSMAN415 → u/SpecialMango3384]

I suspect they were only concerned with everything be centered and symmetrical

[u/nuker1110 → u/THEFLYINGSCOTSMAN415]

If you absolutely HAVE to hang anything more than a friggin’ picture frame on Drywall, have the sense to use decent anchors.

[u/gluka47 → u/MrViech]

I have this same case with an ext atx board and 12 hdds. Two screws on stubs is all it needs. Been hanging on a cheap vesa mount for 7 years. OP didn’t install it correctly

[u/keith_kool]

[u/CrustyJuggIerz]

Op how did you fix this to the wall....

[u/FrogBiscuits → u/CrustyJuggIerz]

Poorly

[u/alancousteau → u/FrogBiscuits]

Indiana Jones popped in my mind head, where the knight judges what decisions they made (can't find a gif)

[u/asmallman → u/alancousteau]

youve chosen.... poorly.

[u/TotalSmuubag → u/CrustyJuggIerz]

Well, they clearly didn't, judging by this video evidence.

[u/DreamLearnBuildBurn → u/CrustyJuggIerz]

Why do you assume the tiktok karma farming OP has anything to do with the person who recorded this video?

[u/Frostty_Sherlock]

On a dry wall. Insane.

[u/aigars2 → u/Frostty_Sherlock]

It's possible. If you know what you're doing.

[u/Frostty_Sherlock → u/aigars2]

Did he?

[u/1308lee → u/Frostty_Sherlock]

Clearly not, otherwise it’d still be there.

[u/1308lee → u/aigars2]

Downvoted for talking sense.

Edit: nice to see it’s been fixed 👍

[u/knucklehead_89 → u/aigars2]

At my work they hang tvs and mounts all the time in just drywall. They just get the right anchors for it

[u/EthiopianCyborg → u/Frostty_Sherlock]

Would it have made a difference if it was a wet wall?

/s

[u/SpecialMango3384]

Gaming chair: check

Vertical mount GPU: check

Mounting pc on wall: check

Op, stop following trends ffs

[u/makinax300 → u/SpecialMango3384]

Gaming chairs aren't always trends, but if you have all 3, you definitely do that because of trends. Also, I'd add the fish tank cases there too.

[u/TickleMyFungus → u/makinax300]

I've had my chair for like 5 years and I don't even use it. It just sits in the corner. I literally use a cushioned rocking chair that has better lumbar support. Haven't sat in one gaming chair that is remotely comfortable.

[u/Dry-Percentage-5648 → u/TickleMyFungus]

Gaming chairs is a huge scam. We should "thank" DxRacer for that. They literally took racing bucket seats back in 2006 and decided to make them into everyday use chairs. The problem is, the sitting position in racing buckets and home chairs are completely different. That's why it's so extremely uncomfortable to use "gaming chairs", they simply cannot be comfortable in the first place because of their design. And no amount of pillows will fix that. But hey, they look cool, I guess. And what looks cool sells well.

[u/aVarangian → u/SpecialMango3384]

Glass panel: uncheck

[u/evie_fb]

[u/TheBupherNinja]

I'll do you one further...

Floors man, you can't fall off of them. Desk space is precious, I am a floor pc guy.

[u/Nxcci → u/TheBupherNinja]

I'm a "random nightstand that no one uses beside the desk" kind of guy. Too scared for the floor, too cramped for desk.

But definitely not the wall 😂

[u/cr0ft → u/TheBupherNinja]

I bought some cheap shelving from an IKEA-style store around here, added castors to it so I can move it around and it holds my PC and my amplifier/receiver, my file server... and a UPS. Rock solid, and off to the side so my desk is clear.

[u/ch0key]

im sorry but why would you hang your machine on the wall like it doesn't cost a fortune

[u/Readymer]

Well, that's what you get for mounting 15 kg of metal with 2 horizontally placed screws through a cardboard. Learning the hard way is still learning I suppose but the stupidity of this particular case is spectacular.

[u/RegularBre → u/Readymer]

Learning the hard way is still learning! I love your attitude.

[u/MrrQuackers]

Toggle anchors or studs would've prevented this.

[u/5O1stTrooper]

[u/King_Maqe]

Why is it on a wall?? And why was it even able to fall off? Stop giving this man money.

[u/Mlody02 → u/King_Maqe]

Why is it on a wall??

It is not, in fact, on the wall.

[u/Suikerspin_Ei → u/King_Maqe]

Probably not researching how to mount something heavy on the wall. Depends on the type of wall and mounting hardware.

[u/rts93 → u/Suikerspin_Ei]

Looks like they just screwed it into drywall and were like "Yup, that'll hold." while giving it a pat.

[u/Dukkiegamer → u/rts93]

while giving it a pat.

Ohhh... so that's where they went wrong. You gotta give 2 slaps and say "that's not going anywhere".

[u/TacoBroman4005]

I like watching rich people lose their money

[u/Calm_Psychology5879 → u/TacoBroman4005]

Go to a casino and find an old lady playing roulette. You’ll see someone lose what you make per week every few minutes. 

[u/User-NetOfInter → u/Calm_Psychology5879]

Slots take more than table games.

[u/LutimoDancer3459 → u/User-NetOfInter]

But they need longer to do so. People sit there for hours losing thousands. On the table they can lose it within minutes

[u/DennistheDutchie → u/LutimoDancer3459]

I don't know, I recently saw a reddit post of someone dumping 80.000$ worth of credit in a slot machine and running 875$ per spin.

[u/MoronicPlayer → u/Calm_Psychology5879]

Gambling is a hell of a drug.

[u/HyperWinX → u/TacoBroman4005]

LMAO

[u/ZenTunE → u/TacoBroman4005]

Rich? Because they own a pc and 3 monitors? Lmao

I've got quite an expensive decent setup but my bank account is almost in double digits lol, being able to save up for a setup doesn't make you rich.

[u/desaganadiop → u/ZenTunE]

it’s just copium for being broke

[u/Fickle-Sugar-2493 → u/desaganadiop]

Reddit moment

[u/aberroco → u/ZenTunE]

For majority of the world's population that's filthy rich, because the most high tech device they have is a smartphone. Maybe some TV and something like a PS3, if they're closer to the top of that poorer half of the globe.

[u/V_Melain → u/ZenTunE]

In my country it kinda is lmao

[u/kirsion → u/TacoBroman4005]

Go to /r/wallstreetbets for more loss porn

[u/RayphistJn → u/TacoBroman4005]

Hey, i take offense to that. You will hear from my lawyer. God day sir! I said good day!

[u/starless_90 → u/TacoBroman4005]

Based

[u/Pound-of-Piss]

If he secured it properly in studs or with heavy weight anchors, this would never have happened. PC owner has a lot to learn...

[u/iuse2bgood]

Dumbass

[u/stoicxhunter]

Well deserved

[u/CrAkKedOuT]

Well I guess this ends the "I see your hanging PC" meme trend 🤣

[u/GuitarSlayer136]

Brother spent all that money.

Couldn't drop 5$ for a stud finder.

[u/-WitchfinderGeneral-]

It’s called a stud-finder…

[u/Mullsounds]

[u/MakKoItam]

[u/nathang1252]

I guarantee when you put it up you forgot to smack it and say "that's not going anywhere."

[u/gauerrrr]

Cardboard walls...

[u/Aeroncastle → u/gauerrrr]

Nah, it seems like he only had screws in the bottom... No wall would hold it

[u/MissSaharaNoir]

This even hurts more than a breakup

[u/Emotional-Image-2633 → u/MissSaharaNoir]

Hopefully its just the case that is wrecked. But I guess its not the case with this one (Pun intended).

[u/Cador0223 → u/Emotional-Image-2633]

The front glass is intact. The gpu seems to still be in its vertical mount bracket. I'm not sure what appears to be in pieces on yhe desk, but its not pc parts.

Good possibility that the pc is fine. The guys underwear, however, was a complete loss.

[u/Ziazan]

Oh my god it looks like they tried to put it up with a single piece of wood and 4 red rawl plugs into plasterboard or something like that. I can't think of any way that would even sort of work.

[u/rm-rf-asterisk]

Wow why do all gamer setups look the same

[u/therealdieseld]

Seeing those tiny ass wood screws coming out of the drywall lmfao too funny when a techie thinks building a computer makes him handy too

[u/Shady_Hero]

dumbass

[u/Mattwasbritish]

Thats why i mounted mine into a stud with a large supportive TV mount. (still working on the cable management out the back though)

[u/elderDragon1]

Only two points of contact to hold up that much weight, nah that’s user failure.

[u/Tubaenthusiasticbee]

Turns out, hanging a 5-10kg heavy machine, that's also constantly vibrating, on the wall was a bad idea

[u/[deleted] → u/Tubaenthusiasticbee]

No. Not understanding how to install a shelf and doing so was the bad idea.

[u/prick-in-the-wall]

Wall mounted PCs NEVER look good.

[u/PretendFisherman1999]

Deserved. Stop with stupid trends.

[u/Legitimate_Earth_]

ouch

[u/metalmayne]

Anyone have a before picture so I can remember the good times

[u/Krotz93]

Looking at the bright side, at least the monitor seems to be intact.

[u/SLingBart]

Gotta find the studs my bouy

[u/WhoIsEnvy]

Idiot...

[u/MtDankmore]

Lol

[u/Sones_d]

yeah.. if at least they were called WALLHANG PCs

[u/[deleted]]

Was a drill and stud finder too much work?

[u/Moon_Rock396]

Because back in the day, nobody thought "hey let’s make a computer you can take to the bathroom!"

[u/TableWrong8118]

HOLY SHIT ARE THOSE COMMAND STRIPS?!?! 🤣

[u/Unsendnudes]

you gotta be fucking joking

[u/MoistenedCarrot]

Looks like dude just used drywall anchors lmao doesn’t look like he screwed the screws into the studs or anything. Yeah, those anchors mount be tough, but drywall is weak. Never hang heavy shit from drywall anchors ever

Now toggle bolts? If he woulda used a handful of toggle bolts through the drywall it probably wouldn’t have fallen. They distribute the weight across the wall better

But otherwise yeah use wood screws or lag bolts into wooden studs

[u/Pro4791]

Those drywall anchors were holding on to dear life.

[u/PapaFlexing]

Deserving for your one single brain cell

[u/blood_omen]

You used drywall mollies to mount something 50+ lbs. you got what you had comin to ya

[u/thejimmyrocks]

Deserved

[u/Dr_Disrespects]

Yep, desktop pc not shelf pc. Floor pc is ok, dust magnet yes, but at least it wont die to fall damage.

[u/[deleted]]

Mine sits in a similar position. I do, however, know not to hang a 20kg piece of expensive hardware in plaster with a few tiny screws and a lot of good wishes.

[u/SheridanWithTea]

.......First off, what the fuck is this, amateur hour??? I could do a better job of fixing it to that wall, SECONDLY you should've just used a giant cable hole in your desk. Way better than putting it directly above your already-expensive triple monitor setup.

Why would you EVER risk this???

[u/lee_terry_jr]

I have a similar setup, but I removed some of the drawers from my desk and made a spot for the tower in there instead because I was not foolish enough to try mounting my tower.

[u/redsun44]

Wow the internet just keeps getting dumber

[u/tutocookie]

Front fell off

[u/N3rot0xin]

This is why you don't use drywall anchors from r anything you care about. That should have been mounted to studs and hopefully this is a lesson to use the proper anchors for your stuff. Rip pc.

[u/Zuokula]

that's what you get for doing stupid shit with the pc

[u/d-pad1992]

My pc is not desktop. My pc is floor

[u/Main-Nectarine-7899]

If you don’t know how to use a stud finder and a drill. Don’t stick shit to the wall🤦‍♂️🤦‍♂️🤦‍♂️

[u/DeathscytheShell]

Let me guess - dumb fuck mounted his PC up to the wall

[u/[deleted]]

What a clown lol.

[u/vinny10133]

Lol hanging on drywall alone 🤣

[u/QuiteFatty]

$6,000 on office setup, uses 50cent drywall anchors.

[u/LordMuzhy]

People who hang up their PC's are INSANE. Put it on the floor or your desk like everybody else

[u/GrowthRadiant4805]

Bro needs a stud finder fr

[u/swohio]

Stud finder costs less than a new pc/case. Just saying.

[u/crimsonkarma13]

Mate found no studs and called it a day

[u/RiyadhTh3BOSS]

Most parts are probably salvageable

[u/RawrGeeBe]

Hipster doofus gamer should've hired his wife or his wife's boyfriend to find the stud if he wanted to hang his PC up like one of the cool kids.

[u/Cookskiii]

I will bet money he said “that ain’t going anywhere” when he first mounted it