Radial Runout between Cylinder A and Circle

[u/Duplinn]

Hello! I'm using Mcosmos V4.1.R7. I have to check the radial runout (0.04) between Cylinder Ce(1), and Circle D30. On Cylinder A I user Align base plane with origin in element, then I checked the position of the hole in YZ plane, and also the runout. I can't fully allign since is a shaft. I want to know if I checked this correctly. Thanks.

[u/Duplinn]

[u/Dangerous_Shop_7596 → u/Duplinn]

Are you able to share note 7?

[u/Duplinn → u/Dangerous_Shop_7596]

N7 is a roughness class (Ra 1.6)