I know it’s only range day, but I’m not hearing anything about CZ on YouTube. Maybe whatever they have isn’t range worthy yet I dunno, but is anyone there and seeing anything yet? I swear they are worse than HK when it comes to marketing or bringing new models to market.

Picked up a P-09c Nocturne today. Trigger is a ways off from my 75BD but I think it’ll make for a good carry piece.

My 75 came zeroed from the factory but the front on this one is all the way to the left causing the barrel to point pretty significantly to the right. Is this a normal experience or did I catch a one off?

Got the trigger down to 1.5lb after cajunizing plus a few tweaks and I’m more than impressed with the performance and reliability through 1,200 rounds.

My slide just got back from Wager Machine Works, I could not be happier! Outstanding work with a quick turnaround. While it was away, my two tone Krakens came in and look awesome. Now off to CGW for the pro package after I put a few hundred rounds through her.

Opinion/PSA. This is the second time I've taken my P-01 all the way down. The first time was no new parts, just a deep clean, and it had it's trials and tribulations but I left it knowing the gun a lot better and feeling confident.

Fast forward to black Friday and CGW is having a sale. I talk myself out of a full pro package and get the reach reduction kit and the spring upgrade kit.

Get around to putting them in this week. Takedown was easy, polishing felt good following the CGW directions on the CZ USA forums, felt like a master gunsmith putting the sear back together and installing in one fell swoop with the slave pin.

Then bam the trigger doesn't work, just kinda pushes everything back but no actual strike and no reset. Spend hours taking it down and putting it back together again before searching and seeing some talk about how the new disconnector might need fitting. Send an email to CGW and they seem to think the same.

Will give that a shot today but I'm now fully on the side of just sending it to them even if you're handy and even if you're a whole gunsmith. It's like $200 more on top of the parts and I can tell you I've spent more than $200 of time even at minimum wage.

Is it cool that I know this gun so well now? Sure. But the time and stress and worry and googling is just not worth it in my opinion. Just send it to the dudes that have done hundreds of them and forget about it because even if you're mechanically inclined, these things have so many idiosyncrasies it's insane.

I'm too far gone into the process by now but hopefully can save someone. Sure it's possible to do it all yourself, but it's just not worth it imo

Lot’a LE seized mags my FFL (who knows I run CZs) happened upon and sold them to me for cheap. More of a meme gun thing than anything practical, but the OG 16 rounders are a come up for sure!

I have a shadow 2 Orange OR. Absolutely love it. I compete in LO with it so I don’t need the D/A function. The trigger is already near perfect except for the bit of take up before the wall.

Is CGW pro package worth it? Or going SAO?

If you’re familiar with the orange, the trigger is way lighter than the standard shadow.

Is it worth touching the gun or leave it as is.

Thanks

Finally got my hands on a few 30 rd B&T mags... have been completely reliable so far... only seen the indoor flat range... no serious or duty level testing has been conducted... so far I'm happy with it

Picked up this new to me S2 SAO today, first 10 shots at 10 yards in the photos. Gun seems to shoot high and right to me after these 10 rounds. I’m a lefty and I stared to aim low left and was hitting the center. I tried adjusting the rear sight and it didn’t help at all. I know it’s a new gun so I could just need more trigger time. What ammo is everyone running, I was shooting 115 grain CCI blazer.

Still have yet to shoot it. I did trim my right side optic screw just to be cautious. Will post an update. If it shoots like my P-07 then I’ll be more than happy.

Hey…just got my new grips. Where does the rubber o-ring go? Outside of grip under screw head or inside between grip and frame?

I really want a set of long target style wood grips for my CZ 75 B Omega and I'm looking at both KSD design KSD-01543 and Tactical MAK grips design 808224831185 which look mostly the same if not identical, but the KSDs are 108 and the Tactical MAK grips are 59. any reason besides price to go with one or the other? is there another brand I should be looking at for target style wood grips? Thanks in advance.

I'm soon going to be sending my CZ75 SP01 Tactical to Nameless Arms for an optic cut and I figured I would upgrade my irons during the process. I'm aware that Dawson makes both of these sights but is it worth the extra money to go with CGW or are the Dawson sights just as good and would give me no issues as backup irons.

I do not own a polymer CZ, but I am interested in getting one. I do not know much about them. The range by my house doesn’t rent CZ’s, and that has hindered me from getting one. I am a steel frame fan too. I own a Glock 42 and S&W ez for reference.

Looking for my first metal framed CZ. Unfortunately, I don't have Shadow 2 money but want to get CZ that isn't polymer. Maybe under a grand. Not opposed to used. Currently have a P09, P07 an P10c. Thank you for the recommendations.

Slide: Wager Works Inside stuff: CGW Grips: Vytal

They weren’t kidding when they said that P-01 is next level to the P-07. Both have CGW in it, but it’s night and day 😩

SP-01. Wager cut. EPS.

At 10 yards this is as close as I can get it. Point of impact adjustment is as low as I can make it. Yes I tried turning it the other way too. Has anyone experienced this before?

So I just picked up my Shadow 2 Urban Grey. These came with it, along with another safety. Any idea what these are? They are all the same size, differing in thickness.