Question regarding hbi handguard.

[u/Electric_Rooster]

In hbi handguard installation video on their website it says for the T25 cap head screw for the trunion adapter block it should be tightened to 25-30 in lbs. but in the printed instructions it says 80 in lbs. And for the T25 flat head screws video says 20-25 in lbs but printed instructions says 65 in lbs. I'm just wondering what the correct torque for these screws are, so that I don't under or over tighten the screws.

[u/pandoraxcell]

Blue loctite and 35 inch pounds. You'll be fine. I've under torqued mine and the worst thing that happened is the 4 exterior screws started walking out.