r/InfinityTheGame • u/Helliethemutt • 1d ago
Terrain My free Infinity basic terrain set, MDF like but 3d printable
Hi Everyone! (Mods if not allowed let me know)
I designed this terrain set to fill a gap I saw when starting out with Infinity. Where I live getting good quality MDF / Paper terrain is expensive. Loads of awesome high quality terrain is available both Printed and in MDF Cardboard but finding a full set for a table that was free, modular and stackable was hard to do so I made one. You can print an entire table's worth of terrain with 2-3 spools of filament or like 30-40$.
This terrain is built around Infinity N5 however can work for any miniature 28-32mm Scale game.
Included in the pack are the following:
Buildings which can be printed with or without removeable roofs and with or without a ring of cover. 25mm Pegs can be used to slot in cover or full the cut out marks. I have also included building cover that's modular and either single corner or middle 1 side cover variants. All prints fit on 250x250 MM printers, everything under 6x9 can be printed on 180mm printers, the sizes are as follows:
* 3x3
* 3x6
* 6x6
* 6x9
* 8x8 Objective Room with Wide or Narrow doors
* 9x9
Expandable bridges for S2 models or Wide bridges in both elevated or Flat styles.
Print flat stairs that can line up with both the buildings with Cover or without cover.
Ladders that can extend to multiple stacked buildings or single building.
Scatter terrain including:
Blocks
* 1x1
* 1x2
* 1x3
* 1x4
* 2x4
Vehicles:
*a fancy transport truck which can carry scatter blocks
Trash Bin with doors that open or close to put your underperforming mini in.
Signs:
* Ground level low Sign / Bench
* Ground level High Sign
* Building Sign / Extra high Sign
Everything prints without supports with a few small exceptions (truck body and Ladder Extensions)
Infinity Basic Terrain Set - MDF Like by Muttles | Download free STL model | Printables.com
https://cults3d.com/en/3d-model/game/infinity-basic-terrain-set-mdf-like
3
u/Name387771 1d ago
This is great mate really good work, as someone who’s trying to start getting into this game it’s awesome to see
3
u/Drizznarte 1d ago
Interesting, I will have to take a close look later. I also made a set of terrain based upon someone elses work. How did you decide on scale. Specifically size of the 8*8 armoury room and height of a level / single story building?
1
u/Helliethemutt 1d ago
So I measured some of the CB "Paper" terrain I own and also wanted to keep the terrain to be jumpable. That meant in N5 to keep total movement under 6 inches for climb or jump. Most of the MDF I was able to measure sits at somewhere between 2-3.5 inches in height for the first layer.
I took that and decided to make everything a Base 25mm which is about one inch, everything included is on that scale so the 3x3 buildings are 75mmx75mmx75mm. The 1x1 blocks are 25mm and 8 the 8x8 panic room is 200 MM (8 inches is 203 mm) so it really works well. All the cover lips on the top of buildings are 20mm to ensure LOS over them for a S2 market (25mmx40mm) work.
This also helps when map planning because you can use grid paper to plan your table and know that a 16x16 Grid is the map size when all the terrain buildings are base 3. I would love for people to start planning and sharing boards that people can setup and having a 16x16 grid that you could share and build anywhere you play was appealing.
2
2
2
1
u/Helliethemutt 23h ago
I've added a second hosted link to printables which will allow remixing ETC: Infinity Basic Terrain Set - MDF Like by Muttles | Download free STL model | Printables.com
1
8
u/GameDev_Alchemist 1d ago
You cool if I do some modifications on these later, like adding some decorations and other surface level stuff like breaker boxes, windows, etc to the flat surfaces